Suitable for medium/high pressure heavy load pump
1. The conveying medium has a wide range and permits the medium to contain a certain amount of impurities.
2. The integrated design of screw and screw sleeve improves the rigidity and deflection of the shaft, and ensures stable and reliable operation.
3. Selection of various cooling modes for bearings can better protect the bearings and prolong their working life.
4. Structural optimization design allows short-term dry operation.
5. It has strong self-priming ability and low NPSHr value, and can transport a certain proportion of vapor-liquid mixture.
6. Selection of various cooling modes for bearings can better protect the bearings and prolong their working life.
Quarterly Maintenance and Maintenance
1. Check all the nuts on the base and the bolts of the pressing device for loosening.
2. Installation stipulates that the oil in the gearbox should be replaced every three months. Loosen the release screw plug of the gear box and release the gear oil. Tighten the release plug, open the oil injection plug, inject clean light oil, and clean the gear box. After cleaning, open the release plug, release the light oil, tighten the release plug, inject the prescribed gear oil from the injection plug to the middle of the oil mark, tighten the injection plug.
Performance Viscosity: 2.0～100000 mm2/s
Maximum Pressure:6.3 Mpa
Maximum Temperature:180 ℃