Universal three-screw pump with wide application
1.Optimized improvement and aesthetic appearance: The traditional inlet and outlet positions are changed, so that they are located at both sides of the pump but in a straight line, resulting in a pleasing appearance; meanwhile, the design is innovated and therefore the inlet and outlet could be exchanged on user’s site without any change to pipelines;
2.Pump core assembly for convenient maintenance and accessory replacement: The pump is in a simple and compact structure, and the pump core assembly is in assembly construction; therefore, the pump core can be taken out as a whole, which is convenient for maintenance and repair;
Notes for pump Selection:
1.Because the flow speed at pump inlet will rise up along with the increase of the motor speed,resulting into the decrease of reliability,therefore,by taking into consideration of the pump,the motor shall be selected according to the recommended value provided in the Procedures of Type Selection.
2.To better avoid the impurities from entering the pump,it is suggested to provide a filter with filtering accuracy of 40 mesh（filtering area is 15-20 times of flow passage diameter）in front of pump inlet.
Performance Viscosity:3.0 ~ 1500 mm2/s
Flow:5 ~ 5300 L/min
Maximum Pressure:4.0 Mpa
Maximum Temperature:150 ℃