1.Flow and speed are in direct proportion, automatic flow adjustment can be achieved by speed controller.
2.Various shaft sealing options can be realized due to composite design of sealing chamber
3.Opposite direction transfer in short term can be realized due to composite design of the flange and bearing.
4.Various stator and rotor material pairing for various working conditions.
5.Stable flow and pressure, no pulsation, low noise and strong self-priming ability.
6.Wide application scope for various fluid medium, including high viscosity, solid content, fiber, suspended impurities.
7.Use oil instead of traditional grease for bearing to enable more sufficient and effective bearing lubrication
Performance:Flow 180 m3/h
Maximum Pressure:2.4 Mpa
Maximum Temperature:220 ℃
Structural characteristics of single screw pump:
The self-priming performance is good, the structure is simple, the economy is durable, is insensitive to impurities, the utilization ratio is high, and is not easy to break down.
It has unique self-sealing, so it has excellent inhalation performance.
Transport medium has a wide range of viscosity, and medium with poor fluidity can also be transported. Because there is no stirring, shearing and other phenomena in the transportation process, the medium containing fibers or fearing crystal damage can be transported.
The flow rate is proportional to the speed, which is especially suitable for the place where the flow rate needs to be adjusted.
The direction of operation and flow is reversible, the installation type is various, and it has a very wide range of applications.
The flow rate is stable and the fluctuating shear is minimum.
It has high efficiency in operation, long service life of rotating parts and little wear and tear. And less parts, easy maintenance and replacement, so that maintenance costs are the lowest.
The screw can harden on the surface, adapt to harsh working conditions and prolong the service life of the pump.
The liner is lined with rubber materials of different qualities to realize the transmission of different media.
The two universal joints connect the screw and the drive shaft to transfer the torque. The universal joints are covered by rubber sheath to ensure internal lubrication.