1.Flow and speed are in direct proportion, automatic flow adjustment can be achieved by speed controller.
2.Various shaft sealing options can be realized due to composite design of sealing chamber
3.Opposite direction transfer in short term can be realized due to composite design of the flange and bearing.
4.Various stator and rotor material pairing for various working conditions.
5.Stable flow and pressure, no pulsation, low noise and strong self-priming ability.
6.Wide application scope for various fluid medium, including high viscosity, solid content, fiber, suspended impurities.
7.Use oil instead of traditional grease for bearing to enable more sufficient and effective bearing lubrication
Rotor:Variable material optional based on medium(40Cr,304,316L,2205…).The rotor surface hardness can reach HRC55 for better abrasion resistance and surface finish degree can reach 0.2 after special polishing process.
Stator:Various rubber material with more than 40 recipes,able to handle all kinds of abrasion,corrosive,high-temperature and other rigorous conditions.
Suction casing and discharge joint:various material optional and more flexble installation with suction can coming from top,left and right which are all interchangeable.
Performance:Flow 180 m3/h
Maximum Pressure:2.4 Mpa
Maximum Temperature:220 ℃