1.Flow and speed are in direct proportion, automatic flow adjustment can be achieved by speed controller.
2.Various shaft sealing options can be realized due to composite design of sealing chamber
3.Opposite direction transfer in short term can be realized due to composite design of the flange and bearing.
4.Various stator and rotor material pairing for various working conditions.
5.Stable flow and pressure, no pulsation, low noise and strong self-priming ability.
6.Wide application scope for various fluid medium, including high viscosity, solid content, fiber, suspended impurities.
7.Use oil instead of traditional grease for bearing to enable more sufficient and effective bearing lubrication
Maximum Pressure:2.4 Mpa
Maximum Temperature:220 ℃
When the stainless steel single screw pump works, the liquid is sucked into the sealing space enclosed by the screw thread and the pump shell. When the active screw rotates, the sealing volume of the screw pump increases the pressure of the screw pump under the extrusion of the screw tooth, and moves along the axis. Because the screw rotates at the same speed, the flow rate of liquid outflow is also uniform.
The stainless steel single screw pump is characterized by small screw pump loss and good economic performance. High and uniform pressure, uniform flow, high speed, can be directly connected with the prime mover.
Stainless steel single screw pump can transport lubricating oil, fuel oil, various oils and polymer, used to transport viscous liquids.
Single screw pump is a new type of rotary volume pump with internal engagement. The main working parts are eccentric screw (rotor) and fixed bushing (stator).
Compared with other pumps, single screw pump has its own unique advantages:
Compared with centrifugal pump, single screw pump does not need to install valves, but the flow rate is stable linear flow.
Compared with plunger pump, single screw pump has better self-priming ability.
Compared with diaphragm pump, single screw pump can transport various mixed impurities, media containing gas and solid particles or fibers, as well as corrosive substances.
Compared with gear pump, single screw pump can transport high viscosity material.
Unlike plunger pumps, diaphragm pumps and gear pumps, single screw pumps can be used for filling and measuring agents.