1.Flow and speed are in direct proportion, automatic flow adjustment can be achieved by speed controller.
2.Various shaft sealing options can be realized due to composite design of sealing chamber
3.Opposite direction transfer in short term can be realized due to composite design of the flange and bearing.
4.Various stator and rotor material pairing for various working conditions.
5.Stable flow and pressure, no pulsation, low noise and strong self-priming ability.
6.Wide application scope for various fluid medium, including high viscosity, solid content, fiber, suspended impurities.
7.Use oil instead of traditional grease for bearing to enable more sufficient and effective bearing lubrication
Maximum Pressure:2.4 Mpa
Maximum Temperature:220 ℃
Vibration or noise of pump body:
Reasons: poor installation of water pump or high installation of water pump; damage of motor ball bearing; bending of water pump spindle or non-concentric and unequal with motor spindle.
Processing methods: installing stable water pump or reducing the installation height of water pump; replacing motor ball bearing; correcting bending pump spindle or adjusting the relative position of water pump and motor.
Drive shaft or motor bearing overheating:
Causes: lack of lubricating oil or bearing rupture, etc.
Processing method: add lubricant or replace bearing.
Pump does not water:
Causes: the pump body and suction pipe are not filled with water diversion; the dynamic water level is lower than the pump filter pipe; the suction pipe is broken, etc.